How to change screen lock timeout in Windows 10

How to change screen lock timeout in Windows 10

You may want to change the lock screen timeout setting because it is too long or too fast for Windows to lock the screen when the computer is idle. Windows locks the computer screen automatically after not in use for a certain period of time and it either displays the screen saver or just turns off the display. This is a good feature to protect your computer.

  • Ways to turn off a Windows 10 computer
  • 4 ways to lock Windows 10 computer super fast

Methods of changing screen lock timeout Windows 10

  • What is lock screen timeout?
  • Instructions to change or disable lock screen timeout
    • Method 1: Increase screen lock timeout from Windows settings
    • Method 2: Change lock screen timeout setting from Control Panel
    • Method 3: Use Registry
    • Method 4: Change lock screen timeout using Command Prompt

What is lock screen timeout?

In Windows 10, the lock screen has become quite advanced and a lot more useful. It shows the current date and time, all available local users, and even gives you the option to use Cortana and many other Windows utilities. You can also choose to reboot or turn off your device right from the lock screen.

With more functions, many people are looking for ways to prolong the screen display time when the computer is idle. This screen can be used to access Cortana, show the time and date with beautiful wallpapers or simply liven up the atmosphere instead of displaying a black screen.

To achieve this, you need to configure a lock screen timeout. That way, you can give instructions for Windows 10, so that it doesn’t turn off the screen. The screen will remain displayed even when the device stays on the lock screen and does not receive input for an extended period of time.

Previously, computer screensaver was used to prevent CRT screen recording but today it is a security feature. For example, if the computer is not in use for a few hours, someone can access the files and passwords if the computer is not locked or turned off. But if you have correctly set the lock screen timeout, the screen will automatically turn off after the computer has been idle for a few minutes and if someone tries to access it, Windows will ask for a login password.

The only problem with this security feature is that sometimes the lock screen timeout is set to a short time, which means the computer will lock the screen after being idle for that amount of time. This setting can be annoying for many people as their computer will lock frequently and have to enter a password to use it, which is a waste of time. To prevent this from happening, you need to increase the lock screen timeout setting in Windows 10 .

Note: Make sure to create a restore point in case something goes wrong.

Instructions to change or disable lock screen timeout

There are many ways to change or disable lock screen timeout in Windows 10. All of these steps are easy to follow, however, some of them require more time than others. Do what feels best to you. You can always go back to our makeover article and try another option in the future.

Tip: All of these methods can be done by any user, as the guide is easy to follow and does not require any previous Windows 10 experience.

Now let’s start learning about how to disable or modify lock screen timeout on Windows 10 operating system.

Method 1: Increase screen lock timeout from Windows settings

B approximate 1: Press the Windows key + I to open the Settings, and then click Personalization.

Step 2: From the menu on the left choose Lock Screen.

Step 3 : Now scroll down until you find Screen timeout settings and select it.

Step 4: Set the time setting in Screen to a higher value if you want to avoid turning off the screen frequently.

Step 5: If you want to disable this setting completely, choose Never from the drop-down menu.

Step 6: Also, make sure the Sleep time is set to higher than the screen off time otherwise the computer will go to sleep and the screen won’t lock.

Step 7: It’s best to disable Sleep mode or set the time for at least 30 minutes or more.

Step 8: Restart your computer to save changes.

Method 2: Change the settings for lock screen timeout from the Control Panel

Note: This is just an alternative method for the above method, if you have followed the above, skip this step.

Step 1: Press Windows key + X and select Control Panel.

Step 2: Click on System and Security , then click on Power Options.

Step 3: Click Change plan settings next to the active Power plan.

Step 4: Set up the same settings as the method above.

Step 5: Be sure to set the settings for both batteries and when plugged into a power outlet.

Method 3: Use Registry

Step 1: Press Windows key + R then type regedit and press Enter to open Registry Editor.

Step 2: Follow the following path in the Registry:

HKEYLOCAL_MACHINESYSTEMCurrentControlSetControlPowerPowerSettings16b95f-f776-4464-8c53-06167f40cc99EC4B3A5-6868-48c2-BE75-4F3044BE88A7

Step 3: On the right window, double-click Attributes DWORD.

Step 4: If you can’t find it, you need to create a DWORD, right-click an empty area in the right window and choose New > DWORD (32-bit) .

Step 5: Name it Attributes and double click on it.

Step 6: Now change the value from 1 to 2 and press OK .

Step 7: Start your computer to save changes.

Step 8: Right-click on the Power icon in the system tray and select Power Options.

Step 9: Click on Change plan settings .

Step 10: Then click Change advanced power settings.

Step 11: Scroll down until you see Display , then click on it to expand the settings.

Step 12: Double click on Console lock display off timeout and then change the value from 1 minute to the time you want.

Step 13: Click Apply and OK .

Step 14: Restart your computer to save changes.

Method 4: Change screen timeout k chemical use Command Prompt

Step 1: Press Windows key + X and select Command Prompt (Admin).

Step 2: Type the following command and press Enter :

powercfg.exe /SETACVALUEINDEX SCHEME_CURRENT SUB_VIDEO VIDEOCONLOCK 60 powercfg.exe /SETDCVALUEINDEX SCHEME_CURRENT SUB_VIDEO VIDEOCONLOCK 60

Note: You must replace “60” in the above command with the desired screen timeout (in seconds), for example if you want 5 minutes and set it to 300 seconds.

Step 3: Then, type the following command and press Enter :

powercfg.exe /SETACTIVE SCHEME_CURRENT

Step 4 . Restart your computer to save changes.

I wish you all success!

5